INDUSTRIAL
THE HIGHEST-QUALITY INTERIOR PAINT AND COLORS PROVIDE EXCELLENT COVERAGE FOR YOUR LIVING ROOM WALLS, BEDROOM, KITCHEN AND BATHROOM.
COMMAND® Waterborne Acrylic Urethane
Extremely durable, single-component, multi-substrate waterborne acrylic urethane ideal for facility maintenance and property management applications where minimal maintenance disruptions and quick returns to service are required. This interior/exterior, UV-resistant acrylic urethane enamel provides superior adhesion and abrasion resistance on a variety of substrates.
|
Features
|
More Details
|
Benjamin Moore Latex Dry Fall
This fast dry interior latex is designed to provide superior hiding and allow for minimal surface preparation. The dry fall qualities of this product cause the overspray to settle as a dry powder in approximately 10 feet of fall. Can be tinted with up to 2oz per gallon of Benjamin Moore Gennex® colorants.
|
Features
|
More Information
|
INSL-X® Traffic Coatings
Latex, acrylic fast set and alkyd traffic and marking paints, in a variety of colors, constitute the INSL-X® portfolio of traffic paints.
|
Features
|
More Information
|
INSL-X® Freezer Kote
Freezer Kote is a high-gloss, rust-inhibiting coating designed for application in sub-freezing temperatures. It is an alcohol-based formula that dries quickly.
|
Features
|
More Information
|
INSL-X® Fire Retardant Paint
|
Features
|
More Information
|
Ultra Spec HP D.T.M. Acrylic Enamels
Ultra Spec® HP D.T.M. Acrylic Enamels provide excellent rust inhibition for superior corrosion control and protection for metal substrates.
Gloss (HP28)
|
Features
|
More Information
|
Recommended for:
Ferrous or non-ferrous metal, Bilco® doors, railings, structural or support steel, wood, roof decks, equipment, fencing, metal storage shed and general maintenance painting interior or exterior surfaces.
Ferrous or non-ferrous metal, Bilco® doors, railings, structural or support steel, wood, roof decks, equipment, fencing, metal storage shed and general maintenance painting interior or exterior surfaces.
Low Lustre (HP25)
|
Features
|
More Information
|
Recommended for:
Application to interior or exterior steel, aluminum, galvanized metal. Performs well on structural steel, storage tanks and equipment.
Application to interior or exterior steel, aluminum, galvanized metal. Performs well on structural steel, storage tanks and equipment.
Semi-Gloss (HP29)
|
Features
|
More Information
|
Recommended for:
Ferrous or non-ferrous metal, Bilco® doors, railings, structural or support steel, wood, roof decks, equipment, fencing, metal storage shed and general maintenance painting interior or exterior surfaces.
Ferrous or non-ferrous metal, Bilco® doors, railings, structural or support steel, wood, roof decks, equipment, fencing, metal storage shed and general maintenance painting interior or exterior surfaces.
Ultra Spec HP Acrylic Metal Primer (HP04)
|
Features
|
More Information
|
Super Spec Alkyd Metal Primer (P06)
|
Features
|
More Information
|
Pre-Catalyzed Waterborne Epoxy - Eggshell (V342)
This unique product provides epoxy toughness in a ready-to-use waterborne formula for walls, ceilings and trim (not ideal for floors). Low VOC and water cleanup make this product ideal for use in occupied areas. The cured film is scrubbable, resists water and common cleaning chemicals, and stands up to abrasion and marring. Excellent adhesion to many surfaces, including existing paint, drywall, primed masonry and primed metal.
|
Features
|
More Information
|
Polyamide Epoxy Coating Gloss (V400)
Polyamide Epoxy Coating is a multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and other industrial and commercial substrates requiring a durable coating in severe environments. Floors: moderate- to heavy-duty performance in commercial/industrial environments exposed to heavy foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning. Metal: excellent for use on ferrous metals, non-ferrous metals and galvanized metal.
|
Features
|
More Information
|
Waterborne Amine Epoxy Gloss (V440)
Waterborne Amine Epoxy is formulated to provide good chemical, abrasion and impact resistance on a variety of commercial and industrial surfaces, including steel, iron, concrete, non-ferrous metals, wood and drywall. Particularly suited for use on concrete floors. This product can be applied to many existing generic coating types with less risk of lifting or wrinkling.
When used on floors, this product provides moderate- to heavy-duty protection in commercial environments exposed to frequent foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild chemicals, occasional steam cleaning, and powerwashing.
When used on floors, this product provides moderate- to heavy-duty protection in commercial environments exposed to frequent foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild chemicals, occasional steam cleaning, and powerwashing.
|
Features
|
More Information
|
Aliphatic Acrylic Urethane - Gloss (V500)
Aliphatic Acrylic Urethane – Gloss is a multi-use, two-component urethane appropriate for use on both metal and masonry. This product provides excellent gloss and color retention when used on exterior surfaces exposed to sunlight and rain, and the highly cross-linked formula provides superior abrasion, chemical, and solvent resistance. Due to these outstanding features, urethanes are often used as the final layer in a multi-layer system on steel or masonry.
|
Features
|
More Information
|
OTHER FEATURED BRANDS
|
|
|
|
Available at Greensboro + High Point locations |
